
These instructions are for assembling the SPORT Silicone Foot Pockets to the SPORT Modular Monofin Blade Carbon.
Required Materials for Assembly
- Molchanovs SPORT Modular Monofin Blade Carbon
- Left and right SPORT Silicone Foot Pockets (sold separately)
- 2 screws for each foot pocket (4 total)
- Carbon reinforcement plate
- Phillips head screwdriver
Assembly Instructions
- Match the left and right foot pocket with the corresponding blade (marked on the back side of each blade).
- Insert the blade gently into the slot at the front of the foot pocket and through the side reinforcements. Verify it slides in smoothly without force.
- Carefully adjust the blade's position until the mounting holes on the blade align with those on the foot pockets.
- Position the upper mounting plate over the toe section of the foot pocket, verifying it fits into the provided space.
- Begin hand-threading the screws into the holes of the lower mounting plate.
- Place the lower mounting plate over the blade, aligning it with the upper mounting plate and the holes. Tighten the screws clockwise using a Phillips head screwdriver, applying even pressure.
Caution: Secure the screws firmly but avoid over-tightening, which could strip the threads or damage the blade. Stop when you feel moderate resistance.
Final check: Make sure the blade is not loose and the foot pockets are securely attached. Test by gently flexing the blade and inserting your feet to confirm stability before entering the water.